Warning: THE VOID WIKI IS DEPRECATED. It is no longer being maintained, contains outdated and incorrect information, and will eventually be shut down. Please refer to the Void Handbook, https://docs.voidlinux.org/, for the official documentation. If you can't find the information you're seeking, please raise an issue at https://github.com/void-linux/void-docs/issues

Embedded Images

From Void Linux Wiki
Revision as of 19:02, 25 January 2017 by Duncaen (talk | contribs)
Jump to navigation Jump to search

Install Void Linux by using a prepared rootfs images or tarballs that can be written/unpacked onto embedded devices.

This method allows you to have a system ready to boot/use, once it’s written/unpacked onto the target device.

The rootfs images are prepared with a 2GB large partition. Alternatively, you can extract the *rootfs tarballs* onto your own partitions if you want to customize the partition layout/size and file system choice.

OpenSSH is enabled by default on LAN to easily configure your device after installing the rootfs images.

Username Password
root voidlinux

Supported devices

Board Architecture Instructions
BeagleBone/BeagleBone Black ARMv7, hard float Beaglebone
Cubieboard2 ARMv7, hard float Cubieboard2_NAND_Install_Hack
Odroid U2/U3 ARMv7, hard float Odroid U2
Raspberry Pi ARMv6, hard float Raspberry Pi
Raspberry Pi 2 ARMv7, hard float Raspberry Pi
USB Armory ARMv7, hard float USB Armory